-
$69.05
Standard potot tube – GCT1
Add to CartStndard 7″ long stainless steel pitot tube
-
$161.73
12″ billet grab handle – GHAS12
Select options This product has multiple variants. The options may be chosen on the product pageThis billet aluminum grab handle is machined from ¾” thick extruded aluminum bar, polished, and available in all 12 powder coat finishes. This handle is 11.438″ long, stands 2.5″ tall, and has 5/16″-18 tapped mounted holes that are on 10″ centers.
-
$7.83
1/8″ ID hose blade fitting – GCPM18
Add to CartMade from bass, this fitting has a 5/16-24 thread to a 1/8″ push on mail hose fitting on the other end.
-
$4.69
1/8″ NPT X 1/8″ barb female – GCSF18
Add to CartMade from brass, this fitting has 1/8″ NPT female threads on one side and a 1/8″ male push-on hose fitting on the other.
-
$6.27
Speedo fitting 1/4″ NPT TO 1/8″ – GCSM18
Add to CartMade from brass, this fitting has 1/4″ NPT female threads on one side and a 1/8″ male push-on hose fitting on the other.
-
$2.61
1/8″ ID push on speedometer hose – GCH18
Add to CartIdeal for pitot-style speedometers, 1/8″ ID push-on hose is sold by the foot.
-
$89.22
Pitot tube mount – GCM3
Add to CartStainless steel pittot tube mount for GCT1 pitot tube.
-
$5.49
AN #4 hose fitting x 1/8″ NPT – GCF4
Add to CartThis brass fitting has 1/8″ NPT female threads on one side and a 1/4″ push-on hose connection on the other. This fitting is ideal for a Livorsi mechanical gauge.
-
$10.95
1/8 NPT x 1/4 push-on 90 degree – GCF6
Add to CartThis 90-degree brass fitting has 1/8″ NPT male fittings on one side and 1/4″ push-on hose fittings on the other side
-
$5.23
Speedo hose 1/4″ inner diameter push-on – GCH14
Add to CartIdeal for pitot-style speedometers, 1/4″ ID push-on hose is sold by the foot.
-
$4.69
AN #4 hose fitting for 1/4″ hose – GCF1
Add to CartThis brass fitting has #4 female threads on one side and 1/4 push on hose fitting on the other.
-
$4.69
AN #4 hose fit adapter/speedo – GCF2
Add to CartThis fitting is made from brass with 1/4″ NPT female threads on one side and #4 fitting on the other
-
$760.00
Livorsi side mount throttle with trim switch for Malibu engines – EECARFS5154
Add to CartLivorsi EECARFS5154 side mount electric shift and the electric throttle work specifically with Axis engines. This throttle features our new solid-state switching and Livorsi Velocity throttle position sensor. This throttle includes a momentary On / Off / On Trim switch to operate …
-
$230.75
LinkUp NMEA 2000 gateway – GATEWAYV
Add to CartThe LinkUp Gateway makes it easy to connect things like fuel level sensors, trim tabs, rudder angles, and engine data to your boat’s NMEA 2000® system. If you’re adding new electronics or upgrading old wiring, this device helps turn those …
-
$27.35
LinkUp LED indicator interface harness for single device – GATEWAYVHARNESS1
Add to CartThis harness is made for setups where you’re using a LinkUp NMEA 2000® gateway with a single-slot Livorsi Marine adjustable LED indicator. Since the LinkUp gateway is programmed using your smartphone, it’s often easier to install it near the dash instead …
-
$34.10
LinkUp LED indicator interface harness for twin device – GATEWAYVHARNESS2
Add to CartThis harness is specifically for applications when the Link Up NMEA 2000 gateway is used with a two-slot Livorsi Marine adjustable LED indicator. Since the Link Up gateway requires programming via your smartphone, it could be more convenient to mount the …
-
$14.14
LinkUp sensor side harness – GATEWAYVHARNESSBT
Add to CartThis harness goes on the sensor side of the gateway, it connects with an AMP connector and has bullet connectors on the other end.
-
$25.34
GPS recall switch bezel – FLGPSRS
Select options This product has multiple variants. The options may be chosen on the product pageThe GPS recall switch bezel is machined from aluminum and available in all 12 Livorsi standard colors.
-
$50.00
4 5/8″ flat polished stainless steel gauge bezel – FL458SS
Add to CartThis flat polished stainless 4 5/8″ gauge bezel has a 4 5/8″ cutout and a 5 11/16″ outside diameter.
-
$40.27
4″ gauge to 3 3/8″ gauge adapter bezel – FLGPS
Select options This product has multiple variants. The options may be chosen on the product pageThis gauge bezel is a great solution when upgrading your dash to Livorsi gauges, but your boat has a 4″ hole for a speedometer and tachometer. This bezel has an inside diameter of 3 3/8″ to center your Livorsi gauge, a machined lip …
-
$48.00
4 5/8″ flat gauge bezel – FL458
Select options This product has multiple variants. The options may be chosen on the product pageThis flat 4 5/8″ gauge bezel has a 4 5/8″” cutout and a 5 1/2″ outside diameter. Making it ideal for Livorsi tachometers and speedometers. Machined from billet aluminum it is available in all of the standard Livorsi colors.
-
$40.00
3 3/8″ flat polished stainless steel gauge bezel – FL338SS
Add to CartThis flat polished stainless 3 3/8″ gauge bezel has a 3 3/8″ cutout and a 3 3/4″ outside diameter.
-
$17.00
3/4″ flat ignition switch bezel – FL34
Select options This product has multiple variants. The options may be chosen on the product pageThis flat ignition switch bezel has a 3/4″ cutout and a 15/16″ outside diameter. Machined from billet aluminum it is available in all of the standard Livorsi colors.
-
$38.00
2 5/8″ flat polished stainless steel gauge bezel – FL258SS
Add to CartThis flat 2 5/8″ gauge bezel has a 2 5/8″ cutout and a 3 1/4″ outside diameter. Machined from billet aluminum it is available in all standard Livorsi colors.
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.